Significant high-grade copper intersections from Reward
Released
Released
Announcement PDF
Significant high-grade copper intersections in
shallow infill drilling results from Reward
.
03 July 2024
•
Assays from five diamond drill holes at Reward have been received.
•
Significant intersections of high-grade copper confirmed in the upper Marshall and
Reward Main lodes.
▪
KJD6281:
4.15 m @ 5.04% Cu, 129.06 g/t Ag, 0.41 g/t Au from 15.38 m
Including
▪
KJD625:
4.41 m @ 6.40% Cu, 74.79 g/t Ag, 0.33 g/t Au from 15.00 m
Including
▪
1.32 m @ 11.06% Cu, 153.37 g/t Ag, 0.52 g/t Au
KJD629:
1.39 m @ 4.29% Cu, 19.05 g/t Ag, 2.93 g/t Au from 10.20 m
And
5.33 m @ 2.44% Cu, 17.10 g/t Ag, 0.71 g/t Au from 17.00 m
Including
▪
1.82 m @ 8.16% Cu, 251.14 g/t Ag, 0.56 g/t Au
KJD631:
3.55 m @ 3.55% Cu, 36.79 g/t Ag, 0.49 g/t Au from 82.00 m
including
And
1.79 m @ 5.05% Cu, 18.09 g/t Ag, 1.26 g/t Au
0.75 m @ 7.30% Cu, 55.20 g/t Ag, 0.31 g/t Au
3.17 m @ 2.11% Cu, 21.77 g/t Ag, 0.61 g/t Au from 87.63 m
Including
0.76 m @ 5.79% Cu, 43.70 g/t Ag, 1.04 g/t Au
KGL Resources (ASX:KGL) is pleased to announce high grade copper intersections within the upper
Marshall and Reward Main Lodes. The five holes reported from Reward were targeted at the gaps in drilling
where the 2024 mineral resource estimate2 classified blocks as Indicated category at the edges of the
Measured category zone in the proposed open pit (Figure 1).
Marshall Lode
Holes KJD625 and 628 targeted the upper Marshall lode and intersected high-grade copper and silver
mineralisation in the oxide and transition zones, carrying the copper minerals malachite (Cu2 (CO3) (OH)2)
and chalcocite (Cu2S) respectively (Figure 1, Figure 2). Although the two holes are 15 m apart, the
northernmost hole (KJD625) exhibits a relatively shallow oxide zone, containing predominately chalcocite
below 10 metres (down hole depth). Whilst, the southernmost hole (KJD628) exhibits a relatively thicker
oxide zone, containing predominantly malachite and significant silver intercepts. Assay results from the two
holes were:
KJD628
•
4.15 m @ 5.04% Cu, 129.06 g/t Ag, 0.41 g/t Au from 15.38 m including
1.82 m @ 8.16% Cu, 251.14 g/t Ag, 0.56 g/t Au
KJD625
•
4.41 m @ 6.40% Cu, 74.79 g/t Ag, 0.33 g/t Au from 15.00 m including
1.32 m @ 11.06% Cu, 153.37 g/t Ag, 0.52 g/t Au
1
2
All intervals in this report are estimated true thicknesses unless otherwise specified.
KGL Announcement 23 May 2024 “Increase in JORC Measured Resource for Jervois Project.”
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Reward Main Shoot
Hole KJD629 was aimed at the gap in drilling in the upper Main shoot and intersected 2 zones of strong
copper mineralisation separated by a lower grade (<0.5% Cu) interval (Figure 3). The intersections are
predominantly in the oxide zone with malachite being the main copper bearing mineral.
KJD629
•
1.39 m @ 4.29% Cu, 19.05 g/t Ag, 2.93 g/t Au from 10.20 m and
•
5.33 m @ 2.44% Cu, 17.10 g/t Ag, 0.71 g/t Au from 17.00 m including
1.79 m @ 5.05% Cu, 18.09 g/t Ag, 1.26 g/t Au
Hole KJD631 was targeted 50 metres below hole KJD629 and intersected four sulphide zones, containing
chalcopyrite and pyrite that yielded high-grade copper mineralisation (Figure 1, Figure 4):
KJD631
•
2.15 m @ 1.18% Cu, 12.20 g/t Ag 0.16 g/t Au from 78.10 m and
•
3.55 m @ 3.55% Cu, 36.79 g/t Ag, 0.49 g/t Au from 82.00 m including
0.75 m @ 7.30% Cu, 55.20 g/t Ag, 0.31 g/t Au and
•
3.17 m @ 2.11% Cu, 21.77 g/t Ag, 0.61 g/t Au from 87.63 m including
0.76 m @ 5.79% Cu, 43.70 g/t Ag, 1.04 g/t Au and
•
0.70 m @ 1.43% Cu, 7.60 g/t Ag, 0.16 g/t Au from 99.00 m
Hole KJD630 was aimed at a gap in drilling at the northern end of the proposed open pit and intersected two
thin zones of oxide in the hanging wall (up to 15 m down hole depth) and another two thin zones of transition
copper minerals (malachite and chalcocite) in the footwall (Figure 1,Figure 5).
KJD630
•
1.10 m @ 1.44% Cu, 10.19 g/t Ag, 0.05 g/t Au from 7.50 m and
•
1.82 m @ 0.54% Cu, 35.88 g/t Ag, 0.16 g/t Au from 11.70 m and
•
0.75 m @ 0.63% Cu, 5.90 g/t Ag, 0.06 g/t Au from 30.00 m and
•
1.09 m @ 1.01% Cu, 3.31 g/t Ag, 0.01 g/t Au from 33.80 m
Next Steps at Reward
The primary objective during the remainder of 2024 is to continue infill drilling of the Reward underground
resource and increase confidence in the resource by upgrading inferred to indicated status.
Reward Deeps will also to be targeted for resource extensions.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Figure 1. Long projection looking west of Reward deposit with reported drill hole intersections and 2024 resource model
blocks coloured by confidence category (red= measured, yellow = indicated, blue = inferred). Previous drill hole traces
in grey colour.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Figure 2. Marshall lode cross section through 7494547 mN looking north with reported drill hole holes coloured black
and 2024 resource model blocks >0.5% Cu grade. Previous drill hole traces grey with colours showing assays >0.5%
Cu.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Figure 3. Reward Main lode cross section through 7494992 mN looking north with reported drill hole holes coloured
black and 2024 resource model blocks >0.5% Cu grade. Previous drill hole traces grey with colours showing assays
>0.5% Cu.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Figure 4. Reward Main lode cross section through 7495028 mN looking north with reported drill hole holes coloured
black and 2024 resource model blocks >0.5% Cu grade. Previous drill hole traces grey with colours showing assays
>0.5% Cu.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Figure 5. Reward Main lode cross section through 7495116 mN looking north with reported drill hole holes coloured
black and 2024 resource model blocks >0.5% Cu grade. Previous drill hole traces grey with colours showing assays
>0.5% Cu.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Table 1. Reported drill hole collar details
Collar
Hole ID
Easting
Northing
Final
Elevation
Comment
dip
azimuth
depth
(grid)
(m)
KJD625
630281.55
7494552.98
357.21
-49.77
89.47
48.00
Marshall
KJD628
630277.68
7494546.31
357.49
-50.18
120.14
50.60
Marshall
KJD629
630351.84
7494991.23
366.30
-52.48
90.69
44.80
Reward
KJD630
630348.63
7495117.04
365.26
-49.28
99.56
49.80
Reward
KJD631
630303.98
7495028.20
356.57
-52.34
90.89
120.00
Reward
Table 2. Reported drill holes intercept summary.
Hole ID
KJD625
incl
KJD628
incl
KJD629
KJD629
incl
KJD631
KJD631
incl
KJD631
incl
KJD631
KJD630
Downhole Estimated
Depth From Depth To
Thickness
True
m
m
m
Thickness m
Cu
%
Ag
g/t
Au
g/t
Pb
%
Zn
%
15.00
15.70
15.38
17.18
10.20
17.00
18.82
78.10
82.00
85.00
87.63
90.00
99.00
7.50
11.70
30.00
21.00
17.50
21.80
20.00
12.20
24.60
21.38
81.00
86.73
86.00
91.83
91.01
99.94
9.00
14.20
31.00
6.00
1.80
6.42
2.82
2.00
7.60
2.56
2.90
4.73
1.00
4.20
1.01
0.94
1.50
2.50
1.00
4.41
1.32
4.15
1.82
1.39
5.33
1.79
2.15
3.55
0.75
3.17
0.76
0.70
1.10
1.82
0.75
6.40
11.06
5.04
8.16
4.29
2.44
5.05
1.18
3.55
7.30
2.11
5.79
1.43
1.44
0.54
0.63
74.79
153.37
129.06
251.14
19.05
17.10
18.09
12.20
36.79
55.20
21.77
43.70
7.60
10.19
35.88
5.90
0.33
0.52
0.41
0.56
2.93
0.71
1.26
0.16
0.49
0.31
0.61
1.04
0.16
0.05
0.16
0.06
0.38
0.74
0.57
1.10
0.26
0.15
0.26
0.11
0.07
0.06
0.04
0.05
0.12
0.05
0.15
0.11
0.35
0.38
0.45
0.35
0.12
0.14
0.17
0.39
0.15
0.25
0.20
0.39
0.07
0.97
0.19
0.23
33.80
35.25
1.45
1.09
1.01
3.31
0.01
0.09
0.17
This announcement has been approved by the directors of KGL Resources Limited.
Lode
Marshall
Marshall
Reward
Main
shoot
Reward
Main
shoot
Reward
HW
Reward
Main
shoot
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Competent Person Statement
The information in this report that relates to Exploration Results is based on information compiled by Dr
James Lally, a Competent Person who is a Member of The Australian Institute of Geologists. Dr Lally is
employed by KGL Resources as a consultant through Mining Associates Pty Ltd. He has over 25 years of
experience that is relevant to the style of mineralisation and type of deposit under consideration, and to the
activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian
Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Dr Lally consents to the
inclusion in the report of the matters based on his information in the form and context in which it appears.
The Reward Resource information was first released to the market on 23/05/2024 and complies with JORC
2012. The company confirms that it is not aware of any new information or data that materially affects the
information included in the original market announcement and that all material assumptions and technical
parameters underpinning the estimates in the relevant market announcement continue to apply and have not
materially changed. The company confirms that the form and context in which the Competent Person’s
findings are presented have not been materially modified from the original market announcement.
Forward Looking statements
This release includes certain forward-looking statements. The words “forecast”, “estimate”, “like”, “anticipate”,
“project”, “opinion”, “should”, “could”, “may”, “target” and other similar expressions are intended to identify
forward looking statements. All statements, other than statements of historical fact, included herein, including
without limitation, statements regarding forecast cash flows and potential mineralisation, resources and
reserves, exploration results and future expansion plans and development objectives of KGL are forwardlooking statements that involve various risks and uncertainties. Although every effort has been made to verify
such forward-looking statements, there can be no assurance that such statements will prove to be accurate
and actual results and future events could differ materially from those anticipated in such statements. You
should therefore not place undue reliance on such forward-looking statements.
Statements regarding plans with respect to the Company’s mineral properties may contain forward-looking
statements. Statements in relation to future matters can only be made where the Company has a reasonable
basis for making those statements.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
JORC Code, 2012 Edition – Table 1
1.1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
•
•
•
•
•
Drilling
techniques
•
Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples
should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done
this would be relatively simple (e.g. ‘reverse circulation
drilling was used to obtain 1 m samples from which 3 kg
was pulverised to produce a 30 g charge for fire assay’).
In other cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules) may
warrant disclosure of detailed information.
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (e.g. core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
•
•
•
•
•
•
•
•
Drill sample
recovery
•
•
•
Logging
•
•
•
Method of recording and assessing core and chip
sample recoveries and results assessed.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining
studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
At Jervois diamond drilling was used to obtain
samples for geological logging and assaying
described in this announcement. Core samples
comprised a mixture of sawn HQ quarter core
and sawn NQ half core. Sample lengths were
generally 1m, but at times length were adjusted
to consider geological contacts.
All reported holes in this announcement
diamond drilled with NQ core from surface
Hole KJD631 sample half core.
All other four holes sampled full core to avoid
sample lost due to friable nature of the core.
•
•
•
•
•
•
Reported drilling utilised HQ3 and NQ diameter
coring equipment depending on depth of drilling.
Coring diameters for reported holes are
summarised in Table A.
Navigational drilling techniques were utilised for
drilling Marshall Lode and Rockface deep
targets, with reported holes in these areas being
wedged from earlier-drilled “parent” holes at
depths specified in Table A.
Diamond drilling was cored from surface for the
reported Reward open pit holes.
Oriented core has been measured for the recent
KGL drilling.
Core recovery for reported drill holes was >95%
with the mineralised zones having virtually 100%
recovery.
No evidence has been found for any relationship
between sample recovery and copper grade and
there are no biases in the sampling with respect
to copper grade and recovery.
All KGL diamond core samples were
geologically logged. Logging in conjunction with
multi-element assays is appropriate for mineral
resource estimation.
Core samples were also orientated and logged
for geotechnical information.
All logging has been converted to quantitative
and qualitative codes in the KGL Access
database.
All relevant intersections were logged.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Criteria
JORC Code explanation
Commentary
Sub-sampling
techniques and
sample
preparation
•
If core, whether cut or sawn and whether quarter, half or
all core taken.
If non-core, whether riffled, tube sampled, rotary split,
etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected, including
for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size
of the material being sampled.
•
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy (i.e.
lack of bias) and precision have been established.
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
•
•
•
•
•
•
Quality of assay
data and
laboratory tests
•
•
•
Verification of
sampling and
assaying
Location of data
points
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Data spacing and
distribution
•
•
•
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
•
•
•
The following describes the recent KGL
sampling and assaying process:
–
HQ core was quartered with a diamond
saw and generally sampled at 1 m
intervals with samples lengths adjusted at
geological contacts;
–
NQ core was halved with a diamond saw
and generally sampled at 1 m intervals
with samples lengths adjusted at
geological contacts;
–
Diamond core samples are crushed to
70% passing 2mm and then pulverized to
85% passing 75 microns.
–
Two quarter core field duplicates were
taken for every 20m samples by Jinka
Minerals and KGL Resources.
–
All sampling methods and sample sizes
are deemed appropriate for mineral
resource estimation
KGL drilling has QAQC data that includes
standards, duplicates and laboratory checks. In
ore zones standards are added at a ratio of 1:10
and duplicates and blanks 1:20.
Base metal samples are assayed using a fouracid digest with an ICP AES finish. Gold
samples are assayed by Aqua Regia with an
ICP MS finish. Samples over 1ppm Au are reassayed by Fire Assay with an AAS finish.
All assay methods were deemed appropriate at
the time of undertaking.
Data is validated on entry into the MS Access
database, using Database check queries and
Maxwell’s DataShed.
Further validation is conducted when data is
imported into Micromine and Leapfrog Geo
software
For the KGL drilling surface collar surveys were
picked up using a Trimble DGPS, with accuracy
to 1 cm or better.
Downhole surveys were taken during drilling with
an Axis Champ gyro instrument.
All drilling by Jinka Minerals and KGL is
referenced on the MGA 94 Zone 53 grid. All
downhole magnetic surveys were converted to
MGA 94 grid.
For Reward there are concerns about the
accuracy of some of the historic drillhole collars.
There are virtually no preserved historic collars
for checking.
There is no documentation for the downhole
survey method for the historic drilling.
Topography was mapped using Trimble DGPS
and LIDAR
Drilling at Rockface was on nominal 50m centres
with downhole sampling on 1m intervals.
The drill spacing for all areas is appropriate for
resource estimation and the relevant
classifications applied.
A small amount of sample compositing has been
applied to some of the near surface historic
drilling.
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Criteria
JORC Code explanation
Commentary
Orientation of
data in relation to
geological
structure
•
•
Sample security
•
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which
this is known, considering the deposit type.
If the relationship between the drilling orientation and
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
The measures taken to ensure sample security.
Audits or reviews
•
The results of any audits or reviews of sampling
techniques and data.
•
1.2
•
•
•
Holes were drilled perpendicular to the strike of
the mineralisation; the default dip angle is -60°
but holes vary from -45° to -80°.
Drilling orientations are considered appropriate,
and no obvious sampling bias was detected.
Samples were stored in sealed polyweave bags
on site and transported to the laboratory at
regular intervals by KGL staff or a transport
contractor.
The sampling techniques are regularly reviewed
internally and by external consultants.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral tenement
and land tenure
status
Commentary
• The Jervois Project is within EL25429 and
EL28082 100% owned by Jinka Minerals and
operated by Kentor Minerals (NT), both wholly
owned subsidiaries of KGL Resources.
• The Jervois Project is covered by Mineral Claims
and an Exploration licence owned by KGL
Resources subsidiary Jinka Minerals.
Exploration done
by other parties
JORC Code explanation
• Type, reference name/number, location and ownership
including agreements or material issues with third
parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
• The security of the tenure held at the time of reporting
along with any known impediments to obtaining a
licence to operate in the area.
• Acknowledgment and appraisal of exploration by other
parties.
•
Previous exploration was primarily conducted by
Reward Minerals, MIM and Plenty River.
Geology
•
•
EL25429 and EL28082 lie on the Huckitta 1:
250 000 map sheet (SF 53-11). The tenement is
located mainly within the Palaeo-Proterozoic
Bonya Schist on the northeastern boundary of
the Arunta Orogenic Domain. The Arunta
Orogenic Domain in the north-western part of
the tenement is overlain unconformably by NeoProterozoic sediments of the Georgina Basin.
The stratabound mineralisation for the project
consists of a series of complex, narrow,
structurally controlled, sub-vertical
sulphide/magnetite-rich deposits hosted by
Proterozoic-aged, amphibolite grade
metamorphosed sediments of the Arunta Inlier.
Mineralisation is characterised by veinlets and
disseminations of chalcopyrite in association
with magnetite. In the oxide zone which is
vertically limited malachite, azurite, chalcocite
are the main Cu-minerals.
Massive to semi-massive galena in association
with sphalerite occur locally in high grade lenses
of limited extent with oxide equivalents including
cerussite and anglesite in the oxide zone.
Generally, these lenses are associated with
more carbonate-rich host rocks occurring at
Green Parrot, Reward and Bellbird North.
Deposit type, geological setting and style of
mineralisation.
•
•
•
Significant high-grade copper intersections in
shallow infill drilling results from Reward
Criteria
Drill hole
Information
Data aggregation
methods
Relationship
between
mineralisation
widths and
intercept lengths
Diagrams
Balanced
reporting
Other substantive
exploration data
Further work
JORC Code explanation
• A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above
sea level in metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the
basis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly explain
why this is the case.
• In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade
truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of
high grade results and longer lengths of low grade
results, the procedure used for such aggregation should
be stated and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
• These relationships are particularly important in the
reporting of Exploration Results.
• If the geometry of the mineralisation with respect to the
drill hole angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are
reported, there should be a clear statement to this effect
(eg ‘down hole length, true width not known’).
• Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration
Results.
• Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
Commentary
• Drill hole details are given in Table A in the body
of the report.
• For mineralised intercept depths refer to Table B
in the body of the report.
•
•
•
The nature and scale of planned further work (eg tests
for lateral extensions or depth extensions or large-scale
step-out drilling).
Diagrams clearly highlighting the areas of possible
extensions, including the main geological interpretations
and future drilling areas, provided this information is not
commercially sensitive.
•
•
•
•
•
Minimum grade cut-off is 0.5% Cu for
intersections above 200m RL
Minimum grade cut-off is 1.0% Cu for
intersections below 200m RL
Aggregate intercepts use length-weighting.
No top-cuts are applied nor considered
necessary
No metal equivalents are used
•
All intercept lengths in this announcement are
estimated true widths. In the main deposit areas,
the lode geometries are well constrained and are
used to estimate true widths to within 0.25 m.
•
Refer to Figures in body of the report
•
Narrow and/or low-grade intersections of known
lodes at Rockface are included in this report.
•
Outcrop mapping of exploration targets using
Real time DGPS.
IP, Magnetics, Gravity, Downhole EM are all
used for targeting
Metallurgical studies are well advanced including
recovery of the payable metals including Cu, Ag
and Au.
Deleterious elements such as Pb Zn Bi and F
are modelled
The current report relates to infill and mineral
resource confirmatory drilling and is ongoing
Brownfields and greenfield drilling has also
commenced
Additional IP and DHEM surveys are planned
•
•
•
•
•
Share your feedback
Discover