High-grade Cu intersections at Reward Deeps and Underground
Released
Released
Announcement PDF
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Highlights
•
Assays received from 16 holes at Reward Deeps, Reward underground and Rockface.
•
At Reward Deeps, hole KJD637 and KJD638 intersected a wide zone of copper mineralisation at Reward
Deeps South lode, while hole KJD639 intersected a massive sulphide zone at Reward Deeps North lode:
▪
▪
▪
KJD6371: 18.90 m @ 1.99% Cu2, 17.43 g/t Ag, 0.32 g/t Au from 527.00 m (Deeps South)
including
▪
1.08 m @ 5.39% Cu, 38.53 g/t Ag, 0.42 g/t Au from 527.68 m, and
▪
0.72 m @ 5.21 % Cu, 41.80 g/t Ag, 0.85 g/t Au from 544.72 m, and
▪
2.29 m @ 3.42% Cu, 27.75 g/t Ag, 0.53 g/t Au from 546.80 m, and
▪
2.24 m @ 4.45% Cu, 38.75 g/t Ag, 0.48 g/t Au From 549.90m.
KJD638: 8.79m @ 2.57% Cu, 36.25 g/t Ag, 0.77 g/t Au from 506.00 m (Deeps South) including
▪
1.24 m @ 4.35% Cu, 26.83 g/t Ag, 0.61 g/t Au from 511.20 m, and
▪
1.57 m @ 4.07% Cu, 54.26 g/t Ag, 1.19 g/t Au From 514.30 m.
KJD639: 6.28m @ 4.05 Cu, 44.22 g/t Ag, 0.42 g/t Au from 570.55 (Deeps North) including
▪
•
2.53 m @ 8.12 Cu, 88.27 g/t Ag, 0.26 Au from 575.00 m.
At Reward underground, strong copper intersections confirm the Reward Main Shoot’s extension at
depth, with holes KJD640, KJD640D1 and KJD640D2 intersecting a broad zone of copper mineralization:
▪
▪
KJD640: 1.76 m @ 1.53% Cu, 7.02 g/t Ag, 0.12 g/t Au from 454.84 m (Main Shoot) and
3.17 m @ 2.17% Cu, 10.43 g/t Ag, 0.23 g/t Au from 477.00 m, including:
▪
1.60 m @ 3.12% Cu, 13.86 g/t Ag, 0.34 g/t Au from 480.00 m, and
▪
1.07 m @ 2.29% Cu, 20.46 g/t Ag, 0.40 g/t Au from 484.75 m
KJD640D1: 6.33 m @ 0.89% Cu, 6.15 g/t Ag, 0.14 g/t Au from 362.70 m (Main Shoot) including
▪
▪
•
1.79 m @ 2.92% Cu, 9.91 g/t Ag, 0.34 g/t Au from 362.70 m
KJD640D2: 8.21 m @ 1.68% Cu, 7.47 g/t Ag, 0.18 g/t Au from 443.00 m (Main Shoot) including
▪
0.82 m @ 4.92% Cu, 19.38 g/t Ag, 0.54 g/t Au from 447.75 m and
▪
1.10 m @ 2.25% Cu, 12.67 g/t Ag, 0.16 g/t Au From 450.93 m and
▪
0.88 m @ 2.60% Cu 7.41 g/t Ag, 0.23 g/t Au From 455.50 m
At Rockface, hole KJD627D2 intersected mineralisation 70 meters below the current resource model,
confirming the DHEM conductor and indicating that the Rockface North Lodes remain open at depth.
KGL Resources Limited (ASX:KGL) is pleased to announce the intersection of high-grade copper mineralisation
at Reward underground and Reward Deeps. All sixteen holes reported in this announcement are part of a
completed infill drilling campaign at Rockface and Reward underground. The campaign aimed to increase
geological knowledge and confidence, facilitating the conversion of inferred resources to indicated categories in
the upcoming resource upgrade.
1
2
All intervals in this report are estimated true thicknesses unless otherwise specified.
A cutoff grade of 0.8% copper applied to all intersections unless otherwise specified.
Page 1 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
All 10 holes drilled at Reward Main underground intersected zones of mineralisation consistent with the resource
model. Additionally, their extension encountered further mineralisation in line with the Reward East Lodes,
significantly extending the Reward East mineralisation further south than previously modeled. These new
intersections enhance the resource model at Reward underground by confirming geological continuity.
KGL Resources’ Chief Executive Officer, Philip Condon commented:
"We are pleased to announce additional positive drill results from our Jervois copper project in the
Northern Territory. Of particular note are the results from Reward underground and Reward East, which
have the potential to significantly strengthen the confidence and scale of our resource model. We look
forward to providing our resource update in the coming weeks, which will incorporate these and previous
results. Our exploration program will now shift focus to shallow RC drilling for further resource addition
and upgrade along the 12 km of the Jervois J-fold strike.”
Reward Main Shoot
Drill hole KJD632 was drilled 130 meters below the base of the proposed Reward pit to test the extension of the
Reward Main shoot and address a gap in the data (Figure 1, Figure 2, Figure 3). The hole intersected a 50meter-wide zone of mineralisation, though most of it falls below the cutoff grade of 0.8% copper, with only a thin
zone showing higher copper grades.
Hole KJCD599D1, drilled 30 meters below the current resource model's lower boundary, intersected narrow
copper mineralisation (Figure 1, Figure 2, Figure 4). Holes KJD640, 640D1, and 640D2 were targeted in vertical
trend, along the projected trend of the Reward Main shoot to test geological continuity of the shoot and to fill
gaps in the data (Figure 5, Figure 6). All three holes encountered massive sulphides bearing strong copper
mineralisation. The best intersections are as follows:
•
KJD632:
2.06 m @ 0.93% Cu, 12.82 g/t Ag, 0.18 g/t Au from 416.90 m (Main Shoot) and
0.90 m @ 0.85% Cu, 4.43 g/t Ag, 0.08 g/t Au from 420.68 m
•
KJCD599D1:
0.61m @ 1.86% Cu, 15.40 g/t Ag, 0.09 g/t Au from 594.44 m (Main Shoot) and
1.86 m @ 1.21% Cu, 73.60 g/t Ag, 0.42g/t Au from 598.95 m
•
KJD640:
1.76 m @ 1.53% Cu, 7.02 g/t Ag, 0.12 g/t Au from 454.84 m (Main Shoot) and
3.17 m @ 2.17% Cu, 10.43 g/t Ag, 0.23 g/t Au from 477.00m including
1.60 m @ 3.12% Cu, 13.86 g/t Ag, 0.34 g/t Au from 480.00m and
1.07 m @ 2.29% Cu, 20.46 g/t Ag, 0.40 g/t Au from 484.75 m
0.59 m @ 0.97% Cu, 5.30 g/t Ag, 0.01 g/t Au from 564.94 m (East Lodes) and
0.85 m @ 1.44% Cu, 14.18 g/t Ag, 0.07 g/t Au from 568.90 m and
0.43 m @ 1.56% Cu, 1.10 g/t Ag, 0.02 g/t Au from 658.86 m
•
KJD640D1:
6.33 m @ 0.89% Cu, 6.15 g/t Ag, 0.14 g/t Au from 362.70 m (Main Shoot) including
1.79 m @ 2.92%Cu, 9.91 g/t Ag, 0.34 g/t Au from 362.70 m
Page 2 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
•
KJD640D2:
1.52 m @ 0.87% Cu, 5.50 g/t Ag, 0.11 g/t Au from 404.65 m (Main Shoot) and
2.38 m @ 0.96% Cu, 9.03 g/t Ag, 0.08 g/t Au from 408.00m and
0.95 m @ 1.27% Cu, 4.20 g/t Ag, 0.15 g/t Au from 418.40 m and
3.53 m @ 0.85% Cu, 5.81 g/t Ag, 0.09 g/t Au from 434.00m including
0.67 m @ 3.22% Cu, 13.80 g/t Ag, 0.39 g/t Au from 444.86 m and
8.21 m @ 1.68% Cu, 7.47 g/t Ag, 0.18 g/t Au from 443.00 m including
0.82 m @ 4.92% Cu, 19.38 g/t Ag, 0.54 g/t Au from 447.75 m including
1.10 m @ 2.25% Cu, 12.67 g/t Ag, 0.16 g/t Au from 450.93 m including
0.88 m @ 2.60% Cu, 7.41 g/t Ag, 0.23 g/t Au from 455.50 m
Figure 1. Map of Reward deposit showing locations of reported drill holes (black traces and labels). 2024 resource block model blocks shown
coloured by copper grade, other drilling shown by light grey trace lines. Reward proposed pit 2024.
Page 3 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 2. Long projection of Reward deposit showing locations of reported drill hole intersections. 2024 resource block model blocks shown coloured
by copper grade. Proposed reward open pit outline 2024. The DHEM conductor plates modelled at Marshall Deeps. Reward East Lodes have been
filtered out, which are parallel to Deeps upper part.
Figure 3. Cross section through KJD632 trace (7494735.00 mN) and Figure 4. Cross section through KJCD599D1 trace (7494792.00 mN); copper
grade >0.8%. 2024 resource block model blocks shown coloured by resource categories (Red = measured, yellow=indicated, blue=inferred),
proposed reward open pit outline. Older drill hole traces shown in grey.
Page 4 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 5. Cross section through KJD640/640D1/640D2 traces (7494802.00 mN), and Figure 6. Cross section through KJD640/640D1/640D2 traces
(7494802.00 mN) copper grade >0.8%. 2024 resource block model blocks shown coloured by resource categories (Red = measured,
yellow=indicated, blue=inferred), proposed reward open pit outline. older drill hole traces shown in grey.
Page 5 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Reward Main Lodes
Reward Mains containing two separate ore bodies of hanging wall and footwall are immediately to the north of
proposed open pit (Figure 2). Drill holes KJD634, KJD633, KJD633D1, KJD635 and KJD636 were targeted at
the gaps in Reward Main Loads inferred resources (Figure 2). All five holes were extended further to test the
Reward east loads extension.
Hole KJD634, the most southern of the five, intersected a broad zone of low-grade mineralisation (<0.8% Cu).
The best reportable intersections were observed in the Reward Main Lode footwall and a thin interval aligned
with the Reward East Lodes (Figure 7):
•
KJD634:
3.54 m @ 0.85% Cu, 8.15 g/t Ag, 0.07 g/t Au from 531.38 m (Main FW) including
0.71 m @1.25% Cu, 6.00 g/t Ag, 0.07 g/t Au From 533.50 m
0.67 m @ 1.17 % Cu, 7.00 g/t Ag, 0.04 g/t Au from 588.56 m (East Lodes)
Hole KJD633 and KJD633D1 are 30 meters apart in the vertical direction and 35 meters to the north of KJD634,
both holes intersected strong mineralisation at Reward Main Lodes, with bonus lead zinc intersected in the
footwall (Figure 8, Figure 9), best intersections were:
•
KJD633:
0.90 m @ 1.38 % Cu, 9.20 g/t Ag, 0.11 g/t Au from 390.17 m (Main HW) and
3.66 m @ 1.01% Cu, 7.36 g/t Ag, 0.10 g/t Au from 398.03 m and
1.98 m @ 1.80% Cu, 9.41 g/t Ag, 0.21 g/t Au from 407.08 m
0.68 m @ 1.11 % Cu, 40.60 g/t Ag, 0.04 g/t Au 0.33% Pb, 5.16% Zn from 418.50 m (Main FW) and
0.51 m @ 1.54 % Cu, 5.40 g/t Ag, 0.03 g/t Au from 426.75 m
0.60 m @ 1.39 % Cu, 3.00 g/t Ag, 0.02 g/t Au from 501.23 m (East Lodes)
•
KJD633D1:
0.67 m @ 1.44 % Cu, 9.60 g/t Ag, 0.09 g/t Au from 403.98 m (Main HW) and
6.08 m @1.33% Cu, 7.21 g/t Ag, 0.21 g/t Au from 413.06 m and
1.36 m @ 1.94% Cu, 9.25 Ag, 0.49 g/t Au from 415.00 m and
1.84 m @ 2.33% Cu, 10.93 g/t Ag, 0.25 g/t Au From 419.30 m
3.33 m @ 0.87% Cu, 58.29 g/t Ag, 0.12 g/t Au from 429.82 m (Main FW) including
0.52m @ 2.07% Cu, 254.50 g/t Ag 0.38 g/t Au 4.98% Pb from 429.82 m
1.44 m @ 1.15 % Cu, 21.64 g/t Ag, 0.11 g/t Au from 444.94 m
1.40 m @ 1.51 % Cu, 20.95 g/t Ag, 0.02 g/t Au from 494.00 m (East Lodes)
Page 6 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Hole KJD635 further north, (90 meters to the north of KJD633) intersected a wide zone of disseminated
mineralisation, with localised high-grade sulphide brecciated veins at Reward Main Lodes and East lodes
(Figure 10), the best intersections are:
•
KJD635:
1.16 m @ 0.80% Cu, 3.79 g/t Ag, 0.0 g/t Au from 359.00 m (disseminated ahead of main lodes).
2.54 m @1.12% Cu, 12.48 g/t Ag, 0.13 g/t Au from 416.43 m (Main FW) and
0.45 m @ 2.52% Cu, 27.90 g/t Ag, 0.36 g/t Au from 418.84 m
4.74 m @ 0.88% Cu, 3.85 g/t Ag, 0.01 g/t Au from 473.25 m (East Lodes) including
1.06 m @1.51% Cu, 3.28 g/t Ag, 0.02 g/t Au from 473.25 m including
1.38 m @1.27% Cu, 7.13 g/t Ag, 0.02 g/t Au from 478.18 m
0.87m @1.19% Cu, 3.81 g/t Ag, 0.01g/t Au From 503.14 m
Hole KJD636 further north, (100 meters to the north of KJD635) like KJD635 intersected a wide zone of
disseminated mineralisation, and localised high-grade sulphide brecciated veins at Reward Main lodes and East
Lodes (Figure 11), the intersection at Reward east lodes were stronger than previous holes KJD635.
•
KJD636:
1.56 m @ 0.94% Cu, 8.00 g/t Ag, 0.23 g/t Au from 432.20m (Main HW) and
0.52 m @ 2.26% Cu, 79.70 g/t Ag, 0.52 g/t Au from 448.27 m
0.50 m @ 1.68 % Cu, 5.30 g/t Ag, 0.04 g/t Au from 494.53 m (East Lodes) and
1.51 m @ 1.14% Cu, 7.15 g/t Ag, 0.02 g/t Au from 509.13 m and
3.11m @ 2.21% Cu, 17.25 g/t Ag, 0.05 g/t Au from 518.00 m including
1.46 m @ 3.66% Cu, 30.30 g/t Ag, 0.07 g/t Au From 518.00m
Page 7 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 7. Cross section through KJD634 trace (7494925.16 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred), proposed reward open pit outline. older drill hole traces shown in grey.
Page 8 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 8. Cross section through KJD633 and KJD633D1 traces (7494968.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred), proposed reward open pit outline. older drill hole traces shown in grey.
Figure 9. Cross section through KJD633 and KJD633D1 traces (7494968.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred), proposed reward open pit outline. older drill hole traces shown in grey.
Page 9 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 10. Cross section through KJD635 trace (7495050.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred), proposed reward open pit outline. older drill hole traces shown in grey.
Figure 11. Cross section through KJD636 trace (7495150.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred). older drill hole traces shown in grey.
Page 10 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Reward Deeps
Drill holes KJD637 and KJD638, spaced 95 meters apart, targeted the Reward Deeps South Lode, specifically
addressing gaps in the resource model where substantial underground development and stoping are planned.
Both holes intersected broad zones of strong copper mineralisation. Additionally, the extensions of these holes
encountered further mineralisation consistent with the Reward East Lodes (Figure 12, Figure 13).
Hole KJD639, located 75 meters north of KJD638 and aimed at a gap in the Deeps North Lode, also intersected
a broad zone of copper mineralisation (Figure 14).
Holes KJD641D1 and KJD641D2 however, intersected weak copper mineralisation at Deeps North lode
(Figure 1), below the cut-off grade and not reportable. The first daughter hole (D1) intersected a narrow zone of
lead and zinc mineralisation, but the copper grades fall below the cutoff grade (0.8% Cu). The second daughter
hole (D2) drilled 30 meters lower than the D1 also intersected narrow zones of low-grade copper mineralisation.
The best intersections are as follows:
•
KJD641D2:
No reportable copper intersections at Deeps North
1.49 m @ 0.98 % Cu, 34.79 g/t Ag, 0.03 g/t Au from 771.25 m (East lodes)
•
KJD639:
6.28m @ 4.05% Cu, 44.22 g/t Ag, 0.42 g/t Au from 570.55 (Deeps North) including
2.53 m @ 8.12% Cu, 88.27 g/t Ag, 0.26 g/t Au from 575.00 m
2.18 m @ 0.81% Cu, 5.81g/t Ag, 0.09 g/t Au From 614.02 m (East Lodes) and
1.91 m @ 1.70% Cu, 3.06 g/t Ag, 0.13 g/t Au From 619.52m
•
KJD638:
8.79m @ 2.57% Cu, 36.25 g/t Ag, 0.77 g/t Au from 506.00 m (Deeps South) including
1.24 m @ 4.35% Cu, 26.83 g/t Ag, 0.61 g/t Au from 511.20 m including
1.57 m @ 4.07% Cu, 54.26 g/t Ag, 1.19 g/t Au From 514.30m
0.78 m @ 2.96 % Cu, 15.90 g/t Ag, 0.13 g/t Au from 564.66 m (East lodes) and
0.65 m @ 1.09 % Cu, 7.30 g/t Ag, 0.02 g/t Au From 577.20 m
•
KJD637:
18.90 m @ 1.99 % Cu, 17.43 g/t Ag, 0.32 g/t Au from 527.00 m (Deeps South) including
1.08 m @ 5.39% Cu, 38.53 g/t Ag, 0.42 g/t Au From 527.68 and including
0.72 m @ 5.21 % Cu, 41.80 g/t Ag, 0.85 g/t Au from 544.72 m and including
2.29 m @ 3.42% Cu, 27.75 g/t Ag, 0.53 g/t Au From 546.80 m and including
2.24 m @ 4.45% Cu, 38.75 g/t Ag, 0.48 g/t Au From 549.90 m
1.91 m @ 1.94 % Cu, 20.20 g/t Ag, 0.05 g/t Au from 590.94 m (East lodes) and
0.51 m @ 1.15 % Cu 7.00 g/t Ag, 0.04 g/t Au from 616.32 m
Page 11 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 12. Cross section through KJD637 trace (7495258.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred). older drill hole traces shown in grey.
Figure 13. Cross section through KJD638 trace (7495343.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred). older drill hole traces shown in grey.
Page 12 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Figure 14. Cross section through KJD639 trace (7495402.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured by
resource categories (Red = measured, yellow=indicated, blue=inferred). older drill hole traces shown in grey.
Page 13 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Rockface
Drill hole KJD627D2 intersected the Rockface North lodes 70 meters below the current resource model,
encountering narrow zones of mineralisation. Although the intersection was not substantial, it aligns with the
orebody’s pinch-and-swell structure, and sulphide hosted in brecciated magnetite and quartz veins, confirming
the extension at greater depth. All new intersections below the 2022 resource model are expected to add further
tonnage and enhance the upcoming resource upgrade at Rockface (Figure 14).
•
KJD627D2:
0.75 m @ 1.17% Cu 10.80 g/t Ag, 0.26g/t Au from 1086.02m and
1.36 m @ 1.86 % Cu 7.12 g/t Ag, 0.29 g/t Au from 1096.29m.
Figure 15. Long section through Rockface North Lodes (7490527.00 mN), copper grade >0.8%. 2024 resource block model blocks shown coloured
by copper grade. older drill hole traces shown in grey. Previously reported intersection shown in teal colour.
This announcement has been approved by the board of KGL Resources Limited.
Page 14 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Table 1. Reported drill hole collar details
Collar
Hole ID
Easting
Northing
Elevation
dip
azimuth
Final
Depth
(grid)
(m)
Comment
Wedged at 178.2m in the
parent hole and finished with
NQ
HQ up to 309.5m and finished
with NQ
KJCD599D1
629996.09
7494815.86
347.79
-63.81
88.63
693.60
KJD633
630092.73
7494729.93
347.10
-66.46
86.18
480.80
KJD633
630112.73
7494967.98
347.55
-64.72
88.70
534.70
HQ up to 219.8m and finished
with NQ
KJD633D1
630112.73
7494967.98
347.55
-64.72
88.70
555.70
Wedged at 178.5m in parent
hole and finished with NQ
KJD634
630040.49
7494948.30
348.52
-64.96
93.47
629.30
HQ up to 324.4m and finished
with NQ
KJD635
630127.94
7495062.83
347.06
-63.03
93.47
564.80
HQ to end of hole
KJD636
630124.71
7495169.73
347.07
-62.51
94.83
576.70
HQ up to 317.8m and finished
with NQ
KJD637
630074.85
7495274.85
348.03
-61.61
91.69
678.60
HQ up to 192.5m and finished
with NQ
KJD638
630080.62
7495365.45
348.75
-57.00
94.26
636.90
HQ
KJD639
630040.50
7495436.84
349.13
-56.36
92.91
715.40
KJD640D1
630106.73
7494842.06
347.67
-61.86
87.45
447.64
KJD640D2
630106.73
7494842.06
347.67
-65.56
94.26
504.40
KJD640
630106.73
7494842.06
347.67
-65.56
94.26
738.60
HQ to 254.15m and finished
with NQ
KJD641D1
629992.62
7495460.78
349.65
-65.89
90.00
839.30
Lip cut in the parent hole at
299.50m, finished with NQ
KJD641D2
629992.62
7495460.78
349.65
-65.89
90.00
893.50
Lip cut in the first child hole
KJD641D1 at 495m and
finished with NQ
KJD627D2
628128.62
7491048.72
353.35
-72.92
158.95
1260.40
Wedged at 517m in the parent
hole and finished with NQ
HQ up to 588.6m and finished
with NQ
Wedged at 119.2m in the
parent hole and finished with
NQ
Wedged at 134.7 in the parent
hole and finished with NQ
Page 15 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Table 2. Reported drill holes intercept summary.
Downhole
Depth_From
Depth_To
Hole_ID
Thickness
m
m
m
594.44
595.43
0.99
KJCD599D1
598.95
601.96
3.01
416.90
419.70
2.80
KJD632
420.68
421.91
1.23
390.17
391.33
1.16
398.03
402.75
4.72
407.08
409.63
2.55
KJD633
418.50
419.37
0.87
426.75
427.40
0.65
501.23
502.00
0.77
516.03
517.55
1.52
KJD633D1
403.98
404.97
0.99
413.06
422.00
8.94
415.00
417.00
2.00
419.30
422.00
2.70
KJD633D1
429.82
434.70
4.88
incl
429.82
430.58
0.76
444.94
447.04
2.10
KJD633D1
494.00
496.00
2.00
505.00
505.70
0.70
523.04
523.62
0.58
530.47
531.28
0.81
KJD634
531.38
535.88
4.50
incl
533.50
534.40
0.90
588.56
589.40
0.84
359.00
360.80
1.80
KJD635
416.43
420.20
3.77
incl
418.84
419.50
0.66
KJD635
473.25
480.20
6.95
incl
473.25
474.80
1.55
& incl
478.18
480.20
2.02
503.14
504.40
1.26
KJD636
432.20
434.36
2.16
448.27
448.97
0.70
494.53
495.16
0.63
509.13
511.00
1.87
KJD636
518.00
521.80
3.80
incl
518.00
519.78
1.78
True
Thickness
m
0.61
1.86
2.06
0.90
0.90
3.66
1.98
0.68
0.51
0.60
1.19
0.67
6.08
1.36
1.84
3.33
0.52
1.44
1.40
0.50
0.47
0.59
3.54
0.71
0.67
1.16
2.54
0.45
4.74
1.06
1.38
0.87
1.56
0.52
0.50
1.51
3.11
1.46
Cu
%
Ag
g/t
Au
g/t
Pb
%
Zn
%
1.86
1.21
0.93
0.85
1.38
1.01
1.80
1.11
1.54
1.39
0.88
1.44
1.33
1.94
2.33
0.87
2.07
1.15
1.51
0.85
2.55
1.66
0.85
1.25
1.17
0.80
1.12
2.52
0.88
1.51
1.27
1.19
0.94
2.26
1.68
1.14
2.21
3.66
15.40
73.60
12.82
4.43
9.20
7.36
9.41
40.60
5.40
3.00
1.25
9.60
7.21
9.25
10.93
58.29
254.50
21.64
20.95
1.10
5.50
6.40
8.15
6.00
7.00
3.79
12.48
27.90
3.85
3.28
7.13
3.81
8.00
79.70
5.30
7.15
17.25
30.30
0.09
0.42
0.18
0.08
0.11
0.10
0.21
0.04
0.03
0.02
0.03
0.09
0.21
0.49
0.25
0.12
0.38
0.11
0.02
0.02
0.04
0.08
0.07
0.07
0.04
0.00
0.13
0.36
0.01
0.02
0.02
0.01
0.23
0.52
0.04
0.02
0.05
0.07
0.04
0.73
0.11
0.02
0.03
0.03
0.02
0.33
0.00
0.00
0.01
0.02
0.03
0.02
0.04
1.05
4.98
0.16
0.00
0.00
0.00
0.01
0.09
0.04
0.00
0.02
0.05
0.10
0.01
0.00
0.00
0.01
0.07
0.65
0.00
0.00
0.00
0.01
0.20
1.44
0.11
0.12
0.09
0.06
0.07
5.16
0.08
0.02
0.01
0.13
0.13
0.08
0.18
0.92
0.40
1.35
0.00
0.02
0.09
0.01
0.23
0.17
0.02
0.11
0.13
0.04
0.05
0.06
0.04
0.03
0.16
0.27
0.10
0.04
0.05
0.07
Deposit
Name
Main Shoot
Main Shoot
Main HW
Main FW
East Lodes
Main HW
Main FW
East Lodes
Main FW
East Lodes
Main HW
Main FW
East Lodes
Main HW
East HW
East FW
Page 16 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Hole_ID
KJD637
incl
& incl
& incl
& incl
KJD637
KJD638
incl
& incl
KJD638
KJD639
incl
KJD639
KJD640D1
incl
KJD640D2
incl
KJD640D2
incl
& incl
& incl
KJD640
incl
KJD640
KJD641D1
incl
KJD641D2
KJD627D2
Depth From
m
Depth_To
m
527.00
527.68
544.72
546.80
549.90
590.94
616.32
506.00
511.20
514.30
564.66
577.20
570.55
575.00
614.02
619.52
626.00
632.00
362.70
362.70
404.65
408.00
418.40
434.00
444.86
443.00
447.75
450.93
455.50
454.84
477.00
480.00
484.75
564.94
568.90
658.86
694.50
696.17
771.25
1086.02
1094.52
552.91
529.20
545.70
549.90
552.91
593.50
617.00
518.34
512.94
516.50
565.75
578.10
578.00
578.00
616.66
621.83
627.00
633.00
371.30
365.13
407.20
412.00
420.00
440.00
446.00
457.00
449.14
452.80
457.00
458.20
483.07
483.07
486.66
566.00
570.36
659.60
696.67
696.67
773.09
1087.00
1096.29
Downhole
Thickness
m
25.91
1.52
0.98
3.10
3.01
2.56
0.68
12.34
1.74
2.20
1.09
0.90
7.45
3.00
2.64
2.31
1.00
1.00
8.60
2.43
2.55
4.00
1.60
6.00
1.14
14.00
1.39
1.87
1.50
3.36
6.07
3.07
1.91
1.06
1.46
0.74
2.17
0.50
1.84
0.98
1.77
True
Thickness
m
18.90
1.08
0.72
2.29
2.24
1.91
0.51
8.79
1.24
1.57
0.78
0.65
6.28
2.53
2.18
1.91
0.83
0.83
6.33
1.79
1.52
2.38
0.95
3.53
0.67
8.21
0.82
1.10
0.88
1.76
3.17
1.60
1.07
0.59
0.85
0.43
2.02
0.47
1.49
0.75
1.36
Cu
%
Ag
g/t
Au
g/t
Pb
%
Zn
%
1.99
5.39
5.21
3.42
4.45
1.94
1.15
2.57
4.35
4.07
2.96
1.09
4.05
8.12
0.81
1.70
0.85
1.99
0.89
2.92
0.87
0.96
1.27
0.85
3.22
1.68
4.92
2.25
2.60
1.53
2.17
3.12
2.29
0.97
1.44
1.56
0.26
0.15
0.98
1.17
1.86
17.43
38.53
41.80
27.75
38.75
20.20
7.00
36.25
26.83
54.26
15.90
7.30
44.22
88.27
5.81
3.06
4.80
61.60
6.15
9.91
5.50
9.03
4.20
5.81
13.80
7.47
19.38
12.67
7.41
7.02
10.43
13.86
20.46
5.30
14.18
1.10
24.32
55.20
34.79
10.80
7.12
0.32
0.42
0.85
0.53
0.48
0.05
0.04
0.77
0.61
1.19
0.13
0.02
0.42
0.26
0.09
0.13
0.05
0.01
0.14
0.34
0.11
0.08
0.15
0.09
0.39
0.18
0.54
0.16
0.23
0.12
0.23
0.34
0.40
0.01
0.07
0.02
0.04
0.06
0.03
0.26
0.29
0.02
0.02
0.01
0.01
0.04
0.01
0.00
0.16
0.05
0.23
0.01
0.01
0.20
0.39
0.01
0.01
0.00
0.00
0.07
0.07
0.03
0.08
0.02
0.02
0.01
0.02
0.03
0.04
0.05
0.02
0.03
0.03
0.23
0.01
0.09
0.00
1.58
5.88
0.39
0.09
0.11
0.05
0.02
0.03
0.03
0.05
0.26
0.07
0.07
0.11
0.03
0.07
0.05
0.57
1.28
0.10
0.02
0.03
0.03
0.11
0.02
0.08
0.15
0.16
0.06
0.07
0.11
0.37
0.18
0.05
0.16
0.07
0.09
0.22
0.04
0.08
0.00
0.98
3.39
0.29
0.17
0.18
Deposit
Name
Deeps
South
East lodes
Deeps
South
East lodes
Deeps
North
East lodes
Main Shoot
Main Shoot
Main Shoot
Main Shoot
East Lodes
Deeps
North
East Lodes
Rockface
north
Page 17 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Competent Person Statement
The information in this report that relates to Exploration Results is based on information compiled by Atiq Amiri, a
Competent Person who is a Member of The Australian Institute of Geoscientists (AIG). Atiq Amiri is a fulltime employee
of KGL Resources. He has over 5 years of experience that is relevant to the style of mineralisation and type of deposit
under consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012
Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Amiri
consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
Holes previously reported that are summarised in the table below.
Hole
Date originally Reported
KJD627D1
KJCD575W1
KJCD556D4
KJCD556
29/07/2024
08/11/2023
08/11/2023
27/09/2022
JORC Reported
Under
2012
2012
2012
2012
Forward Looking statements
This release includes certain forward-looking statements. The words “forecast”, “estimate”, “like”, “anticipate”, “project”,
“opinion”, “should”, “could”, “may”, “target” and other similar expressions are intended to identify forward looking
statements. All statements, other than statements of historical fact, included herein, including without limitation,
statements regarding forecast cash flows and potential mineralisation, resources and reserves, exploration results and
future expansion plans and development objectives of KGL are forward-looking statements that involve various risks
and uncertainties. Although every effort has been made to verify such forward-looking statements, there can be no
assurance that such statements will prove to be accurate and actual results and future events could differ materially
from those anticipated in such statements. You should therefore not place undue reliance on such forward-looking
statements.
Statements regarding plans with respect to the Company’s mineral properties may contain forward-looking statements.
Statements in relation to future matters can only be made where the Company has a reasonable basis for making
those statements.
Page 18 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
JORC Code, 2012 Edition – Table
1.1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
•
•
•
•
•
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard measurement
tools appropriate to the minerals under investigation, such as
down hole gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling
was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information.
•
•
•
At Reward diamond drilling and reverse
circulation (RC) drilling were used to obtain
samples for geological logging and
assaying. The core samples comprised a
mixture of sawn HQ quarter core, sawn NQ
half core and possibly BQ half core
(historical drilling only). Sample lengths are
generally 1m, but at times length were
adjusted to take into account geological
variations. RC sample intervals are
predominantly 1m intervals with some 2
and 4m compositing (historical holes only)..
All holes reported in this announcement
are diamond drilling of HQ and NQ core
samples half and quarter core
respectively. See table below for full
information.
Mineralisation at all deposits is
characterised by disseminations, veinlets
and large masses of chalcopyrite,
associated with magnetite-rich alteration
within a psammite. The mineralisation has
textures indicative of structural
emplacement within specific strata i.e. the
mineral appears stratabound.
Mineralisation in the reported intersections
is localised high-grade and vein hosted
sulphide zones with broader and wider lowgrade zones on both sides.
Page 19 of 24
High-grade copper intersections at Reward Deeps and Reward Underground
4 November 2024
Criteria
JORC Code explanation
Commentary
Drilling
techniques
•
•
Drill type (e.g. core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic
Share your feedback
Discover